home *** CD-ROM | disk | FTP | other *** search
/ EnigmA Amiga Run 1996 June / EnigmA AMIGA RUN 08 (1996)(G.R. Edizioni)(IT)[!][issue 1996-06][EARSAN CD VII].iso / earcd / utmisc1 / scan8800.lha / SCAN8800 / Help_english < prev    next >
Text File  |  1996-05-04  |  30KB  |  891 lines

  1.  
  2.  ##########################################################################
  3.  #                                                                        #
  4.  # 'SCAN8800' is FREEWARE, you can spread it all over the world, as long  #
  5.  # all files are included.                                                #
  6.  #                                                                        #
  7.  ##########################################################################
  8.  
  9.  
  10.  
  11.   Hello, dear SWL (Short Wave Listener),
  12.  
  13.  
  14.   because I didn't want to store all the interesting frequencys in my
  15.   head, I have written a program for AMIGA called 'SCAN8800'.
  16.  
  17.   'SCAN8800_T' is a turbo-version for AMIGA's with the processor 68020
  18.   (or higher). There is not much more speed, but I think, it's good to
  19.   use this compiler-option.
  20.   'SCAN8800_881' needs a co-processor and 'SCAN8800_T40' the 68040.
  21.   Please use 'CpuBlit' by Eddy Carroll, because then you have better
  22.   scrolling.
  23.  
  24.   The maximal entrys are depending of the free memory of your computer.
  25.   For each frequency you can store up to 9 transmission times and the
  26.   weekdays of them.
  27.     
  28.   Owner of the receiver FRG-8800 from YAESU now can jubilate, but only
  29.   if they also have the interface MINIX MIF-90 (ca. 280 DM) too, because
  30.   you can control this receiver with your AMIGA: setting the frequency
  31.   (min. 25 Hz) and mode also reading S-meter and squelch.
  32.   Infos by:
  33.  
  34.              stabo Elektronik GmbH&Co KG
  35.              Muenchewiese 14-16
  36.              D-31137 Hildesheim
  37.              Germany
  38.  
  39.  
  40.   Further you can scan in different manners and get a chart from the
  41.   S-values.
  42.  
  43.   - scanning of a spectrum
  44.     (LW, MW, ... or as an example from 6200 kHz to 6305 kHz step 1 kHz)
  45.  
  46.   - scanning over time
  47.     To see the fading you can check max. 6 frequencys for 1, 2, ..hours.
  48.  
  49.   - scanning of the selected stations of your data-base.
  50.  
  51.  
  52.  
  53.   If there is something wrong or could be made better then write to me.
  54.   To get a new version, send a disk and enough IRC's.
  55.   Please give information about the KICK-version and about your equipment.
  56.  
  57.   If you like, you can send me empty match-boxes.
  58.  
  59.   
  60.   Thanks a lot to
  61.     - Amiga and Commodore for developing this superior computer
  62.     - SAS for the C-compiler
  63.     - Willi Burmeister for his helpful aid
  64.     - Bryan Brown for the nice DrawMap-program
  65.     - Anders Bjerin (Sweden) & Bernd Schied (BRD) for the File-Requester,
  66.       I found on Fish 464 (appears not under >= OS 2.x)
  67.  
  68.  
  69.  
  70.   So long and 55 73.
  71.  
  72.  
  73.   Address:     Rainer Redweik
  74.                Kattowitzer Str. 7
  75.                D-38440 Wolfsburg
  76.                Germany
  77.  
  78.                Tel.: ..49-5361-36577
  79.  
  80.                EMail: Rainer.Redweik@t-online.de
  81.  
  82.  
  83. *****************************************************************************
  84.  
  85.  
  86. I n f o s:
  87.  
  88.  
  89.  
  90.  
  91. Hardware connection
  92.  
  93.  
  94.      MIF 90         |    Serial (AMIGA)
  95. --------------------------------------------------
  96.               Pin       Pin
  97.  
  98.  In            1---------2 TX
  99.  +14 Volt      2---------9 +12 Volt
  100.  Ground        3---------7 GND
  101.  Out           4---------3 RX
  102.  NC            5       --4 RTS  (Pin 4 and 5 must be
  103.                        |         short-circuited, otherwise
  104.                        --5 CTS   you read "No 'CTS'!")
  105.  
  106.  
  107. Tips for operation
  108.  
  109. After starting SCAN8800 the program try to find the file 'SCAN.prefs' in
  110. the drawer s:. If it wasn't found, the function 'Preferences edit' was
  111. started (Sometimes the help-key give infos about to use the editor. On my
  112. A-2000-C I have to press two times. Yeah.). Here you should enter:
  113.  
  114.  
  115. Stringfields
  116. ------------
  117.  
  118. Path       : Path to find the necessary files (diskname:drawername).
  119.  
  120. Startfile  : Name of file, which should be loaded by starting the program.
  121.              If you leave it empty, no file was loaded.
  122.  
  123. Device     : Name of the device for the serial interface.
  124.              Normaly 'serial.device'.
  125.  
  126. Unit       : Number of the serial port (0 for the default, 1, 2, ... for a
  127.              multiport-card)
  128.  
  129. Domicile   : Your residence.
  130. Long.      : Longitude of your residence. Ex. 10E44  10 degrees east  44 min
  131. Lat.       : Latitude  of   "      "      Ex. 52N24  52 degrees north 24 min
  132.  
  133. Summert.   : Begin of summertime [DD.MM.YYYY]
  134. to         : End   of      "     [DD.MM.YYYY]
  135.  
  136. Time - UTC : difference of lokal(winter)time and UTC.
  137.              Example:  08:00 LOC - 14:00 UTC = -6
  138.  
  139. Fmin       : Minimal frequency [Hz], the receiver can receive.
  140.              Example: 150000
  141.  
  142. Fmax       : Maximal frequency [Hz], the receiver can receive.
  143.              Ex. 29999900, 146000000 or 173999500 or ....
  144.  
  145. VHFmin     : Min. frequency [Hz], the receiver can receive in the VHF-range.
  146.              Ex. 60000000, 144000000 or ....
  147.  
  148. VHFmax     : Max. frequency [Hz], the receiver can receive in the VHF-range.
  149.              Ex. 146000000 oder 173999500 oder ....
  150.  
  151. minStep    : Smallest step-wide of the receiver.
  152.  
  153. Step LW .. : Step-wide for the scan-function you want to use.
  154.              Ex.   LW    MW    SW    VHF
  155.                   3000  9000  1000  25000
  156.  
  157.  
  158.  
  159. Buttons
  160. -------
  161.  
  162. Radio-Buttons  switch to your receiver. Except SCAN8800 not full tested. :-(
  163.  
  164. NoSerRead    : Some lowcost interfaces dosn't support reading the receiver.
  165.                If selected, the programm didn't read the serial port.
  166.  
  167. Interlace    : Switch to interlace-screen.
  168.  
  169. Sort         : Sort-mode after starting the programm.
  170.  
  171.  
  172. RESET          Set back factor (F:) and offset(O:).
  173.  
  174. START          Start S-meter adjusting. (V: -> Value)
  175.                If the indication between receiver and program isn't equal,
  176.                you can try to calibrate.
  177.                A adjustment of receiver or interface is not neccessary.
  178.  
  179.                Only possible, if you have selected 'Power ON' and have not
  180.                selected 'NoSerRead'.
  181.  
  182. ACCEPT         Take over your settings.
  183. CANCEL         Don't take over your settings.
  184.  
  185.  
  186.  
  187. Now you have finished ? Ok, please don't forget to save.
  188.  
  189.  
  190.  
  191. If the program now finds the file 'Stations.SCAN', it show's you several
  192. broadcasting-stations. And also the program try to read the ASCII-file
  193. 'SCAN.chanel'. Here you can give in by an editor the frequency with the
  194. belonging chanel:
  195.  
  196.  27065000:009 /* distress call chanel */
  197. 145625000:001 /* Relais (listen) */
  198.  
  199.  
  200. If not, you can fill the data-base:
  201.   Select menu 'Station edit (right AMIGA-key and e).
  202.  
  203.   Please enter
  204.  
  205.   - the frequency [Hz],
  206.  
  207.   - if you whish an offset (+-999 Hz) (The receiver get freq. + offset),
  208.  
  209.   - the mode (AM, LSB, USB, CW, FM, AMn, CWn or FMn (n means, that the
  210.     narrow-filter should be turned on)),
  211.  
  212.   - the classification (amateur, broadcasting, free radio ...),
  213.  
  214.   - if you want a 't', to give in times,
  215.  
  216.   - the station-name
  217.  
  218.   - the coordinates and
  219.  
  220.   - if known the ITU-sign.
  221.  
  222.  
  223.   Now you can fill the next record. The program detects double freq. and
  224.   don't allow it.
  225.   To leave the edit-mode clear the frequency (with 'Esc') and press RETURN.
  226.  
  227.   If you type a 't' in column 'Time' a new mask appears. Here you kann type
  228.   in the times (in  U T C ) when a transmission goes on the air. On each
  229.   weekday, a transmission is running, you can type a 'x'. If you type 'a'
  230.   in the Sa-column, all week-days were marked.
  231.   In a row you can jump between columns with 'TAB' and 'SHIFT-TAB'.
  232.   In summer some stations started one hour earlier. This case you can mark
  233.   in the column bevor Begin[UTC] with a '#'.
  234.   To delete a time-row type a 'l' in column Begin[UTC] - and if this column
  235.   is clear and you press RETURN you leave the time-mask premature.
  236.  
  237.   In case that you use the ITU-column, SCAN8800 hunted the file 'SCAN.itu'
  238.   for the description and printed it - only if found - under the headline.
  239.   The file you can change by an editor: every row 3 signs for the con-
  240.   traction, a colon and 25 signs for text:
  241.  
  242.    CPV:Kapverdische Inseln
  243.    S  :Sweden
  244.  
  245.   In this column you can read the contents of file 'SCAN.itu' by pressing
  246.   the 'Help'-key. Further more pressing this key changed the sorting. Look
  247.   for the green point.
  248.   With cursor-up/down you can move through the contents. By pressing the
  249.   initial letter the first found text was marked.
  250.   To return use the 'Esc'-key.
  251.  
  252.  
  253. Turn on the receiver:
  254.  
  255. If you select the Power ON-"Key" on the screen (or right AMIGA-p), AMIGA
  256. take control of FRG-8800. Of course only if the connection is correct.
  257. But it's better to switch on with the hardware-POWER-key too.
  258. After pressing RETURN, the frequency and mode of the actual station was
  259. send out.
  260. With cursor-up/down you can change the station.
  261. With cursor-left/right you change the offset (for SSB) in step of 25 Hz.
  262. To change with a step of 100 Hz use a shift-key additional. Using an Alt-
  263. key steps with 500 Hz and using Ctrl-key set the offset to the min/max value.
  264. This changed offset is the one of the data-base and can be saved. Pressing
  265. 'u' calls the undo-function.
  266. Using 'Esc' leave this function.
  267.  
  268.  
  269. Scrolling:
  270.  
  271. The description how to scroll for- or backwards you can get with the help-key
  272. There are several kinds to sort all the items (see menu). Depended from sor-
  273. ting are the reaction of the key 'n' (next) and 'p' (previous). If you have
  274. sorted the mode and the actual-mode is AM, than, after pressing 'n', it
  275. scrolls to mode CW. This can be quicker than using other keys.
  276.  
  277. You can use the 'f' key to enter a frequency - then the program jumps to it
  278. or if not exists, near by (Short: 6205 is expanded to 6205000).
  279. If you have sorted by ITU, you can use the 'i' key to enter an ITU, to which
  280. you whish to jump and by using the 'Help'-key, now you can read the contents
  281. of 'SCAN.itu'.
  282.  
  283.  
  284. Searching:
  285.  
  286. With this function you can search for station-names (uppercase == lowercase).
  287. If there are several conformables, you jump to them by pressing cursor-up/
  288. down keys.
  289. Cursor left/right shows the first/last occurrence.
  290.  
  291. 'F1'  select stations.
  292. 'Esc' ends searching and the requester appears to allow to enter a new word.
  293.       If no word is given in, the program turned to main.
  294. 'q'   ends the search-function without the requester.
  295.  
  296.  
  297. Sorting:
  298.  
  299. The default sorting is time-sorting - after starting you can see if there is
  300. an interesting program on the air.
  301. A little green point in the headline indicates, if you have sorted by mode,
  302. frequency, time, ...
  303.  
  304.  
  305. Select:
  306.  
  307. Selected station can be used in two scan-functions. To select single
  308. items press 'F1', to select groups see menu 'Station select'.
  309. 'Clear' of course clears all selections.
  310. 'Delete' deletes all selected entrys of the data-base !!!
  311. In the scan-function 'Time' you can use up to the first six frequencys, in
  312. 'Selected' all of them.
  313. 'F2': all stations without coordinates were selected for better find.
  314.  
  315. With 'N'ext (shift-n) you jump to next selected station.
  316. With 'P'rev (shift-p) you jump to previous selected station.
  317.  
  318.  
  319.  
  320. S C A N:
  321.  
  322. To exit the scan-functions use the 'Esc'-key. But first you have to stop the
  323. scanning.
  324. If you havn't press the Power-ON-"key", the S-values are random numbers.
  325. 'Mouse-laziers' can use the keyboard, the letters are underlined. Except the
  326. numbers 1 to 6 in time-scanning.
  327.  
  328.  
  329. Scan spectrum:
  330.  
  331. Here you can scan a frequency-range. Choose LW, MW, SW, ... 'Free' allow you
  332. to enter your special wish. Over menu you can select the special broadcasting
  333. ranges on SW and also ranges from the radio amateurs.
  334. The mode can be changed with 'AM', 'FM', ...
  335.  
  336. 'Delay' enable to set a time to wait up to 30 seconds. After this time the
  337. next station will tune in. With the 'SQUELCH'-knob on the receiver it is
  338. possible to control the delay-time. If the signal isn't strong enough, the
  339. program dosn't wait.
  340. Or you can set a range of the S-value, in which delay-time is enabled: with
  341. the mouse set the lower- and/or upper-boundary. Right side of the scale
  342. there are two small grey fields. If you move the mouse in this area, the
  343. outfit of the pointer changed. You can pick and stretch the fields. If the
  344. S-value reached between this fields, the program is waiting, otherwise it
  345. scans on.
  346. With cursor-left/right you can stop and scan by hand.
  347. If you have stopped, you can jump to the next/prev. frequency by using the
  348. 'n' or 'p' key, dependend by the range of S-value.
  349. If you select 'Max hold' from the menu, the max. S-values will be drawn -
  350. may be good for searching short signals (voice radio).
  351.  
  352. Scan time:
  353.  
  354. This function allowes to record the fading over time of 1 to 6 frequencys.
  355. 'Selected' take the first selected stations (max. 6). After this the program
  356. ask for start- and end-time.
  357. With 'Free' it is possible to give in the freq. manualy. Entering a 'e'xit
  358. jumps to time entry.
  359. 'San' starts the record. If start-time is not reached, SCAN8800 waits and
  360. then automaticaly starts.
  361. Selecting the f1-f6 keys on the screen (1-6 on keyboard) turns off/on the
  362. frequency.
  363. If you want to set dots, use key 'd'. Key 'c' clears the last one.
  364.  
  365.  
  366. Scan selected:
  367.  
  368. The program scans all the selected stations. More infos see 'Scan spectrum'.
  369.  
  370.  
  371.  
  372. Other:
  373.  
  374. In the column 'Band' there are printed out the official radio-band in meters
  375. (black). Out of this ranges the wavelength will be calculated (grey).
  376.  
  377. To have a quick view to the times press 't'. After pressing a second time or
  378. using the menu, the window closes automaticly.
  379.  
  380. Who wanted to print out a graphic (please use a 'screengrabber' and a paint-
  381. programm), can press 'shift-p' to let change the colours. So you needn't so
  382. much time by working with the paint-programm.
  383.  
  384. You can fade in/out a map by pressing the 'm'-key. If you have entered the
  385. coordinates, you see the points on the map. Also available in 'Time-Scan'
  386. and 'Selected-Scan'.
  387. The map-file is called 'SCAN.map', for interlace 'SCAN.map_lace'. Delete the
  388. file, you didn't use.
  389.  
  390.  
  391. If the reception isn't good, don't turn AMIGA on. 'She' makes little noise.
  392. Sometimes the contact to my receiver isn't successful. I don't know the
  393. reason, but after a second attempt it works - mostly.
  394. Don't forget to make regulary a backup of the files 'Stations.SCAN' and
  395. 'SCAN.itu' !!!
  396.  
  397. If you want to decode MORSE-, RTTY- or FAX-code you can run the decoder-pro-
  398. gram and SCAN8800, if you have a multiport-card. Change the unit-number in
  399. 'Preferences edit'. I hope, it work - but I havn't tested it.
  400. Here in Germany some equipment use the gameport, so no card is neccessary.
  401.  
  402.  
  403. Much fun by the 'ride on the waves'.
  404.  
  405.  
  406. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  407. #############################################################################
  408.  
  409.  
  410. C H A N G E S :
  411. ---------------
  412.  
  413.  
  414. VERSION 2.33:
  415.  
  416. Bugs removed (and new one installed ?).
  417.  
  418. NoSerRead ->    two SWL told me, that they have build a lowcost interface.
  419.                 But they can't read the S-meter and squelch. If this menu
  420.                 is selected, the programm didn't read the serial port.
  421.                 On the next re-design of the miscel-screen, I will put this
  422.                 menu-part into. So the programm can remember the choice.
  423.  
  424.  
  425. More_Freq.lha   A few files with special frequencys.
  426.                 Use 'LHA -x -M x More_Freq.lha'.
  427.  
  428.  
  429.  
  430.  
  431. VERSION 2.34:
  432.  
  433. Requester ->    added the possibility to cancel a request.
  434.  
  435. select » save:  new menu-item. Now you can save only the selected stations,
  436.                 and if you want, arrange a new file, using 'Merge'.
  437.  
  438. select » modify: new menu-item. All selected stations can be modified.
  439.  
  440.                 Example:
  441.  
  442.                 if you want to change 'Rundfunk' into 'Broadcasting',
  443.                 1. clear all what is selected (right Amiga-shift-l)
  444.                 2. sort by classification (right Amiga-c)
  445.                 3. type 'n' until 'Rundfunk' is in the edit-row
  446.                 4. select all 'Rundfunk' (right Amiga-shift-c)
  447.                 5. use the new menu-item and type in 'Broadcasting'.
  448.  
  449.                 if you want to change 'AM' into 'AMn',
  450.                 1. clear all what is selected (right Amiga-shift-l)
  451.                 2. sort by mode (right Amiga-m)
  452.                 3. type 'n' until 'AM' is in the edit-row
  453.                 4. select all 'AM' (right Amiga-shift-m)
  454.                 5. use the new menu-item and type in 'AMn'.
  455.  
  456.                 ... and so on. Please always do the 5 steps !!!
  457.  
  458.  
  459.  
  460.  
  461. VERSION 2.35:
  462.  
  463. Frequency-range changed. Now the frequency-limits, you have set in the
  464.                 preferences-function, are only guilty, when the programm
  465.                 is sending to the receiver.
  466.                 In the database, you can feed frequencys into your computer
  467.                 in the range of 1 kHz (type '1' and return) up to < 1 GHz.
  468.  
  469. Select » delete now deletes only manual selected stations.
  470.  
  471. Selected        Displays the numbers of selected stations (green). Shows
  472.                 the numbers by using next- and previous-functions (blue).
  473.  
  474. Summertime      I have learned, that in the southern hemisphere summertime
  475.                 is from October to March.
  476.                 Thank you W.F. Wevers from New Zealand.
  477.                 Preferences is changed.
  478.  
  479. File protection mode now will accepted.
  480.  
  481. And a few other changes.
  482.  
  483.  
  484.  
  485.  
  486. VERSION 2.36:
  487.  
  488. Serial          changed to 7 wire handshake. For future enlargement.
  489.  
  490. Scan » Spectrum If you have found several new interesting frequencys, you
  491.                 can insert them into the database. Jump to the freq. by
  492.                 using the cursor-keys or 'n'ext or 'p'revious. Then press
  493.                 the 'i'-key.
  494.                 If it is a new frequency it will be inserted and selected.
  495.                 When you return to the main-screen, the program jumps to the
  496.                 first item and then you can complete the text.
  497.  
  498. Printer         Bug fixed.
  499.  
  500. Map             To zoom in into the area of Europe, press 'z'.
  501.                 New files: 'SCAN.mapZoom1' or 'SCAN.mapZoom1_lace'. Not
  502.                            necessary, if you havn't enough space on disk.
  503.  
  504.  
  505.  
  506. VERSION 2.37:
  507.  
  508. Bugs removed.
  509.  
  510. Printer         Function for black / white - printer corrected.
  511.  
  512. Menu            'Zoom Map' added.
  513.  
  514. Map             The drawing line from transmitter to receiver isn't always
  515.                 correct (Thank's W. Wevers for the info). Maybe next time
  516.                 I will remove this line.
  517.  
  518.  
  519.  
  520.  
  521. VERSION 2.38:
  522.  
  523. Map             Now you can put the map-screen to back by clicking into the
  524.                 upper right corner.
  525.  
  526. 'f'-key         If you use this key for searching a frequency, now you get
  527.                 information, wether there is more than one freq.
  528.                 If the freq. is found and shown in green color, there's only
  529.                 one station, otherwise there are more with the same freq.
  530.  
  531.                 Example:   Freq.       Offset      f+offset
  532.  
  533.                           6000000         0      6000000
  534.                           6000001        -1      6000000
  535.                             ...          ..         ..
  536.                           6000009        -9      6000000
  537.  
  538. Sort            starting by mouse. A quick hack without buttons or so.
  539.                 You can let sort by clicking on the words 'Frequency',
  540.                 'Mod', 'Classification', ...
  541.  
  542.  
  543.  
  544.  
  545.  
  546.  
  547. VERSION 2.39:
  548.  
  549. Bug             fixed (thanks to Ralf Müller who has find).
  550.  
  551. Menu            'Clear': before clear starts, a requester appears.
  552.  
  553. NoSerRead       If you use it, now the program remembers - by saveing
  554.                 'Preferences'.
  555.  
  556. Receiver        A new menu, which in future supports different receivers.
  557.                 If you use an interface without a/d-converter, please select
  558.                 NoSerRead.
  559.  
  560.                 FRG9600: Only frequencys from 60 - 905 MHz will send to the
  561.                          receiver. Other were ignored. Error-reports to me,
  562.                          because I havn't such a receiver for testing.
  563.  
  564. 'SCAN.chanel'   Freq. up to 9999999999 Hz now possible to read.
  565.  
  566. Quicker sort    added. After first sorting, alphabetical order was stored.
  567.                 Follow sortings now are quicker.
  568.  
  569. Sort by name    changed, because it was identical with sort by Classific.
  570.  
  571. Scan-screen     SINPO-numbers added (left side).
  572.  
  573.  
  574.  
  575.  
  576.  
  577. VERSION 2.40:
  578.  
  579. Recompiled      with SAS V 6.50
  580.  
  581. Bug             fixed.
  582.  
  583. TURBO           only for OS 2.0 and higher
  584.  
  585. Min             frequency is      10000 Hz (type: 100).
  586.  
  587. Max             frequency is 2147483600 Hz.
  588.  
  589. Chanel          now up to 9999.
  590.  
  591. Classification  shorten for 2 character.
  592.  
  593. 'SCAN.chanel'   file expanded.
  594.  
  595. Receiver        AR3000, FRG9600 and FRG-100 added, but  n o t  tested !
  596.  
  597. Printer         Special function for HP DeskJet. Maybe a laser-printer can
  598.                 use it too - not tested.
  599.  
  600. Map             Line-drawing removed, because this was not the way of the
  601.                 high frequency.
  602.  
  603. select » inverse invert the selection.
  604.  
  605.  
  606.  
  607.  
  608.  
  609. VERSION 2.41:
  610.  
  611. SetMode-FRG100  bug fixed.
  612.  
  613. Recompiled      with SAS V 6.51
  614.  
  615. Times           of sunrise/sunset added. Maybe as a help for using the
  616.                 GREY-LINE.
  617.                 You can read the times in the time-window and on the map-
  618.                 screen. The times are your local time !
  619.                 There are several formulas, which differ from one another
  620.                 by a few minutes.
  621.                 Thanks to John Devoldere - ON4UN - for the formulars, which
  622.                 I've found in the book 'LOW BAND DX'.
  623.  
  624. Sort by channel: click on 'Chan' in the main-screen.
  625.  
  626.  
  627.  
  628.  
  629.  
  630. VERSION 2.42:
  631.  
  632. Bug             fixed and done a few small changes.
  633.  
  634. Printer         The special function for other printers too, which can print
  635.                 out condensed (FINE). Thank you, Erik L. Pedersen for the
  636.                 tip.
  637.  
  638.  
  639.  
  640.  
  641.  
  642. VERSION 2.43:
  643.  
  644. Fonts           for screen added.
  645.                 Thanks to Ralf Müller for the advice.
  646.  
  647. Sprite          no. 1 changed to no. 0 (only for AA-chips).
  648.  
  649.  
  650.  
  651.  
  652. /********************** ONLY OS 2.0 OR HIGHER *****************************/
  653.  
  654.  
  655.  
  656. VERSION 2.50:
  657.  
  658. Preferences » edit   Re-designed. Description see above.
  659.  
  660.  
  661.  
  662.  
  663.  
  664. VERSION 2.51:
  665.  
  666. Bug             fixed (interlace, sunrise, FRG-100) and done a few small
  667.                 changes. Thanks to Willem and Hans.
  668.  
  669. Search          Cursor left/right shows the first/last occurrence.
  670.  
  671.  
  672.  
  673.  
  674.  
  675. VERSION 2.52:   13-August-1994
  676.  
  677. Save            as ASCII available. Separator is TAB, so you can import
  678.                 the datas into other programms.
  679.  
  680.  
  681.  
  682.  
  683.  
  684. VERSION 2.53:   26-October-1994
  685.  
  686. Languages       The programm now supports the locale.library !
  687.  
  688.                 Thanks to Erik Lauge Pedersen for translation into Danish !
  689.  
  690.                 Thanks to Yvonne Moutoux's translator-office (Hamburg) for
  691.                 the Nowegian words !
  692.  
  693.  
  694. F3              select/deselect  a l l  entrys.
  695.  
  696.  
  697. 'g'-key         starts drawing the Greyline. Of course only when a map is
  698.                 selected. If the yellow line is at the point, you live,
  699.                 you will see sunrise. Otherwise the red line will show,
  700.                 where people can experience sunset.
  701.                 To stop drawing, press 'Esc'.
  702.  
  703.                 If someone can send me a quicker algorithm, it would be
  704.                 nice.
  705.  
  706.  
  707.  
  708.  
  709.  
  710. VERSION 2.54:   27-December-1994
  711.  
  712. Bug             fixed and done a few small changes.
  713.  
  714. Catalogs        In this directory you find the catalog-file. If you want
  715.                 to have your own language, please translate the file
  716.                 'katalogTexte.c' and send it to me. LEN gives the max.
  717.                 numbers of characters.
  718.  
  719. Time-menu       New menu for better handling of the time-entrys.
  720.  
  721. Del-Key         Now you can use it to delete single entrys.
  722.  
  723. 'SCAN.itu'      can be deleted. The new files are 'SCAN.itu_english' and
  724.                 'SCAN.itu_deutsch'. You need only one of them.
  725.                 If you want to use 'SCAN.itu_deutsch', but you have not
  726.                 selected Deutsch in Prefs -> locale, select Deutsch too.
  727.  
  728. Distance-Calc.  Use now a new formula. May be better precision.
  729.                 Authority: Jean Meeus, Astronomische Algorithmen
  730.  
  731.  
  732.  
  733. -------------------------------------------------------------------------
  734.  
  735.  
  736.  
  737. VERSION 2.60:   23-May-1995
  738.  
  739.  
  740.                 A t t e n t i o n  !!!
  741.  
  742.                 The file-format was changed. Please make first a backup
  743.                 of all your *.SCAN-files !!!
  744.  
  745. Infotext:       The new format was neccessary, to have more free memory.
  746.                 For now you can type in info-text for every of the 9
  747.                 timetables.
  748.                 The hole text were shown in the time-window ('t'-key).
  749.                 If you don't like it, use the 'T'-key.
  750.  
  751. Space-key:      The info-text were printed in ITALIC-style corresponding to
  752.                 the times. With the SPACE-KEY you can toggle between
  753.                 station-name and info-text. Indicator is the headline-style
  754.                 of 'Stations name' ===>  normal für stationname, italic for
  755.                 info-text.
  756.  
  757.                 Sorting, selecting and searching apply to the printed text.
  758.  
  759. Reorging:       Determined by the structur-changing it can be required,
  760.                 to reorganize the entrys. The programm does it automaticly.
  761.                 But it can cost a little time.
  762.                 You can force it by hand with the 'R'-key.
  763.  
  764.                 After reorg. you should save the datas !
  765.  
  766. Date:           For every frequency the date and time of the last changing
  767.                 will be stored. This maybe helpful for revising the entrys:
  768.                 simple sort by date.
  769.                 Reading the date/time is possible in the time-window and if
  770.                 you edit an entry, date will be printed on the screen.
  771.  
  772. Map:            All stations with koordinates will display on the map.
  773.                 You can click by mouse to the points and the receiver will
  774.                 change to that frequency.
  775.  
  776.                 It is to recommendable to sort first by ITU. So you can
  777.                 simply change with cursor-keys to other frequencys of a
  778.                 country without given koordinates.
  779.  
  780. Recompiled      with SAS V. 6.55
  781.  
  782. Greyline        Now you can select stations, which were located near the
  783.                 greyline. The distance must be >= 1000 km. Indicator of
  784.                 good time is the color of the actual time in the main-
  785.                 screen.
  786.  
  787.                 Yellow: greyline-time of sunrise
  788.                 Red   :       "       "  sunset
  789.  
  790.                 If no greyline-time, you will be informed.
  791.                 The time-ranges depends of your latitude. Near the equator
  792.                 you have time for around ±8 min, near the Nordkap ±80 min.
  793.  
  794.                 A good way is to sort by ITU, select greyline-stations
  795.                 and jump with 'N' or 'P' to these frequency. With cursor-
  796.                 up/down you can try to get the other stations of the
  797.                 country, which coordinates were not given.
  798.  
  799. Sort            will now use the locale.library (if existing).
  800.                 Advantage   : special characters will be compared correct.
  801.                 Disadvantage: it takes longer time.
  802.  
  803.                 With 'Options -> Sort use Locale' you can switch it off.
  804.                 This state can be stored by 'Preferences » save'.
  805.  
  806.  
  807.  
  808.  
  809.  
  810. VERSION 2.61:   08-December-1995
  811.  
  812. Bug             fixed and done a few small changes.
  813.  
  814. Scan » Spectrum The menu for the amateur-range, encouraged by E.L.Pedersen
  815.                 (OZ1KMZ), has been enlarged.
  816.  
  817. Save            as ASCII has been also expanded. Date, domicile incl. coor-
  818.                 dinates, distances and directions were saved now additional.
  819.  
  820.                 It is possible now, to save data as a normal text-schedule
  821.                 with index '.TXT'.
  822.  
  823. Select » search With this function you can make selections by given words.
  824.  
  825. Time edit       Layout changed. Little changes of sort by time.
  826.                 Hourly repeated transmissions can be typed in the form +xx.
  827.  
  828.                 Example: Transmitter works all 3, 13 and 23 minutes after a
  829.                          full hour, 2 minutes long.
  830.  
  831.                          Type: +03  +05  X X X X X X X
  832.                                +13  +15  X X X X X X X
  833.                                +23  +25  X X X X X X X
  834.  
  835.  
  836. Change mode     In the main-screen it is possible to change the mode of
  837.                 the receiver, if the software is just controlling the
  838.                 receiver.
  839.  
  840.                 F5:        switches on/off the narrow-filter.
  841.  
  842.                 F6 to F10: changes mode to AM, LSB, USB, CW, FMn.
  843.  
  844.                 Mode was displayed in green.
  845.  
  846.                 To take over the mode into the database,
  847.                 press shift- and a F-key (display-colour is red).
  848.  
  849. Coordinates     Format: type in e.g. 10E45,52N26   or
  850.                                      10.75E,52.43N or
  851.                                      JO52JK,JO52JK (Amateur radio: QTH)
  852.  
  853. Sort by distance added.
  854.  
  855. Sort by bearing  added.
  856.  
  857. Ctrl 'w':       My FRG-8800 drifted a little over time. (100 Hz after
  858.                 30 min.) This version compensate it automatically.
  859.                 Time-measures starts, if you switch 'Power ON' by software.
  860.                 If the receiver is already warm, with this key-combination
  861.                 you can compensate the drift in steps of 25 Hz.
  862.  
  863.  
  864.  
  865.  
  866.  
  867. VERSION 2.62:   04-Mai-1996
  868.  
  869. Recompiled      with SAS V 6.56
  870.  
  871. Transmitter-Indicator for the map changed, because it seems that CyberVision
  872.                 can't handle Sprites.
  873.  
  874. Time edit       Additional of typing a 'X', you can use a number from 1 - 4.
  875.                 Use this, to mark, if broadcasting is only one day per
  876.                 month on the air. For example: number 1 in monday means,
  877.                 that only every first monday in a month transmission is on.
  878.                 Number 2 in monday means, that only  every second monday in
  879.                 a month transmission is on, and so on.
  880.                 YELLOW indicates this special running transmission.
  881.  
  882. R-AMIGA 'e'     With this key-combination during controlling the receiver
  883.                 in the main-screen you can switch into edit-mode.
  884.  
  885. Map             A yellow circle shows the point, on wich the sun is shining
  886.                 vertical to the earth. Formulas: M. Maday, DC9ZP
  887.  
  888. Greyline        Shadow-calculation: speed up and bugs removed.
  889.  
  890.  
  891.